Reset Canon MP287 Error Code E08

when turned on the printer error  will  appear on the lcd panel of mp287  printer, the error code  e08  and if printing the  "the ink absorber is almost full" error message appears. Click here to download the canon resetter software.

Follow the guide to fix the printer error

Service mode:

1. turn off canon mp287 error e08 that by pressing the power button. do not unplug the power cable
2. press and hold the stop/reset followed by pressing the power button. so both buttons depressed position.
3. off the button stop/reset while holding power button.
4. press the stop/reset button as much as 6 times.
5. then release both buttons at the same time, then perform the software mode

Software Mode

1. Connect the USB Cable of the printer to the computer
2. The computer  your computer will detect new hardware
3. Run the service tool.
4. select the main menu in the absorber & platen and then click set next to his right
5. canon mp287 printer error e08 who will be back to normal

Read More..

Counter Adjustment Reset of Canon iP2700 series Printer

This is the utility to reset the canon ip 2700 ink overflow error or you might be cannot print because of orange light or what ever is it.

Just try to follow the guide below. Hope it works in your canon printer

Number 1: HArdware Reset

• Turn off the printer without unplugging the power cable.
• Press and hold the RESUME button, then press the Power button.
• Fixed hold the Power button and release the Resume button.
• Then press the Resume button 5 times then release both buttons.
• After the error has stopped blinking mark, your printer has been successfully entered into the Service Mode.

Download Canon  utility

Although you think that you have done resetting, we think that it�s finally over. W have two proceed the second step which is the resetting of its Internet program and that is the software reset

Step 2: Software Reset

• Extract resetter program above and double click the file �servicetool.exe�
• Consider whether the Reload button appears. If there is, click the Reload button to get a new USB port. If no, it means that your printer is ready to reset.
• Prepare some sheets of paper into the printer tray, and press the �Play�, wait until the print stop or display the message �error 001?. Press OK.
• Then press the �EEPROM� and let the printer print again, and then click OK.
• Turn off the printer (you may need to press the Power button twice).
• Turn the printer back on. Voila! Your printer is ready to work again.

Read More..

Printer Reset Brother MFC-J265W and MFC Series

Follow the guide below to reset the purge counter of Brother MFC-J265W

• Unplug the power cable
• Hold down the "Start" button
• Without release the "Start" button, connect the power cable
• When "Maintenance" appears on the screen, release the "Start" button
• Enter 80 with the numerical keypad
• With down button go to the purge counter: "Purge00xxx"
• Enter 2783 with the numerical keypad
• Press on "Stop/Exit" to go back in Maintenance mode
• Enter 9 and 9 to quit the Maintenance mode

The solution above are also available for the following  Brothers MFC printers

• MFC-210C, MFC-215C, MFC-235C, MFC-260C, MFC-240C, MFC-250C, MFC-255CW, MFC-295CN, MFC-297C
• MFC-3240C, MFC-3340CN, MFC-3342C, MFC-3360C
• MFC-410CN, MFC-420CN, MFC-425CN, MFC-440CN, MFC-465CN, MFC-490CW
• MFC-5440CN, MFC-5840CN, MFC-5460CN, MFC-5860CN, MFC-5490CN, MFC-5890CN, MFC-5895CW,
• MFC-620CN, MFC-640CN, MFC-640CW, MFC-660CN, MFC-665CW, MFC-680CN, MFC-6490CW, MFC-6890CDW
• MFC-790CW
• MFC-820CW, MFC-845CW, MFC-885CW, 
• MFC-990CW, 
• MFC-J220, MFC-J265W
• MFC-J410, MFC-J415W, MFC-J430W
• MFC-J5910DW
• MFC-J615W, MFC-J625DW, MFC-J6510DW, MFC-J6710D, MFC-J6710DW, MFC-J6910DW, 
• MFC-J825DW

Read More..

Brother DCP 770CW and 750CW Printer Error 46 Unable to Clean

Brother DCP 770CW and 750CW Reset Solution for Error 46 Unable to Clean,  Other (non-FAX) models:

•     Press the Menu/Set and Black Start keys
•     Next press the �up arrow� key four times to enter the maintenance mode
•     Press the 8 then 0 keys in the initial stage of the maintenance mode to call up the machine�s log information list (function code 80)
•      Press the Black Start key several times to scroll through the log information list to reach the purge counter. The purge counter is the 25th item in the list
•     Press the 2, 7, 8, and 3 keys in this order to reset the purge count to zero
•     Press the Stop/Exit key to return to the initial stage of the maintenance mode
•     Press the 9 key twice to return to the standby state

Read More..

Canon IP2770 Printer Error code 5B00

Guide on how to reset the Canon Ip2770 Printer

Hardware Reset:

• Turn off the printer and unplug the power cord
• Plug the printer power cord 
• Press the RESUME button for three seconds
• Press the POWER button until the green lights appear
• Hold POWER button, don't release the RESUME button
• Release the Resume button, but do not release the POWER button
• Hold POWER button while pressing the Resume button 5 times

Led will flash alternately orange glow green with the last orange. (Don�t mistakenly press 4x because the printer will be totally dead and you have to turn unplug the power to turn it off)

• Release both buttons simultaneously, Led will blink briefly and then will glow GREEN

The computer will detect new devices,  ignore it

Note: Don�t turn off the printer after this procedure is done. Proceed to Software Reset

Software Reset

run Canon iP2770 Software Resetter  
Extract the File iP2770 Resetter 
Prepare a two paper in the printer 
Run the program iP2770 Resetter 

Click "MAIN", then the printer will proceed and iP2770 will print one page with the words "D = 000.0"

Click the "EEPROM Clear" 

Click the "EEPROM", and the printer will print the results off iP2770 Resetter. One of the writing row as follows: "TPage (TTL = 00 000)"

Turn off the printer by pressing the POWER button.

Download the Software Resetter: Click HERE

Read More..

Canon MP245 Printer Counter Resetter

When the error or pop-up message appears on your screen �ink absorber is full�. Your printer needs to reset. Here�s how to fix it

Hardware Reset

• Turn off the printer without pulling the power cords
• Hold down STOP/RESET button and press Power button
• Keep holding down Power button and let STOP/RESET button go
• Then Press STOP/RESET button twice then let BOTH buttons go
• The Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Don�t turn off the printer after hardware reset, then proceed to next step �Software Reset�.

Software Reset

• Extract and double click MP245.exe
• Click Reload Button and you will get a new USB port
• Load  papers in your printer and press the "Main" Button once
• Wait until the printing is done
• Press "EEPROM Clear" button to clear EEPROM
• Press EEPROM button and the printer will print a page of  text
• Turn  off the power of  printer(sometimes you have to press twice the power button to turn off)
• turn on again and its done

 download canon resetter

Read More..

Counter Reset Canon PIXMA iP3680 Printer

This is the manual guide on how to reset your Canon Pixma Ip3680 printer.
Hardware Reset: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow  the following procudre

• Turn off the printer without pulling the power cords
• Hold down RESUME button and press Power button
• Keep holding down Power button and let RESUME button go
• Then Press RESUME button twice then let BOTH buttons go
• You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Software Reset: Using the Resetter
After you download the resetter, extract it and double click "iP3680.exe"

• Click Reload Button and you will get a new USB port
• Load some papers in your printer and press the "Main" Button once, wait until the printing is done
• Then press "EEPROM Clear" button to clear EEPROM
• Then press EEPROM button and the printer will print some text
• Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.

 Download Canon Resetter

Read More..